Project Phoenix - Defining Scope
I plan on making this a multi-part series describing my process of building this “Frankenpad”. Since I don’t have much experience with mechanical engineering, electronics, and low-level programming, this project can easily take me a year of toiling away to get to a working state.
All the source files for this project will be on GitHub:
https://github.com/htemuri/phoenix 
Introduction
Welcome, fellow enjoyers of ThinkPads, to the first part of Project Phoenix! This is an effort where I attempt to modernize an X200 with modern components unlocked by a framework 13 mainboard. The other day, I came across a cool video by jvscholz  about the X210AI , and I fell back in love with the form factor.
I remember using the X2xx series laptops in highschool. The heavy chassis, the tactile feeling of the keyboard and cursor left/right buttons, the smooth user experience of not lifting your wrist to use the trackpoint was just chef’s kiss. In the modern age of laptops, we often compromise repairability and upgradeability for ultra-slim formfactors (👀 Apple) or maximum performance (LPDDR5). Framework is an OEM that aims to nullify these tradeoffs with their modular design and open engineering documentation files. I want to piggyback off of their work and explore the other benefits their open hardware can fruit.
In this part, we will be going over the scope of the project.
Chassis
I want to preserve the ThinkPad look in this upgrade, so we’ll try to keep aesthetic modifications to a minimum. That said, we still need to modify the chassis quite a bit to fit our modern parts. Here are some things we need to tackle:
- Making room for the framework mainboard
- Build a sort of shroud for the mainboard fan exhaust
- Perhaps add ventilation holes for better air inlet (determine after testing performance)
- Slim down display bezel for larger panel
- New I/O ports
Display
We’re going to upgrade the current 12.1” 1280x800 (16:10) screen to a 13.3” 2560x1600 (16:10) screen. I was doing some research on Panelook and I’ve narrowed down the panel options to:
- BOE NE133QDM-N62 : ~$80, 60Hz, ADS, 2560x1600, Matte, 20ms, 2022
- BOE NE133QDM-N65 : ~$80, 60Hz, ADS, 2560x1600, Matte, AMD FreeSync, 30ms, 2023
- *TIANMA TL134ADXP01-00 : ~$90, 165Hz, FFS, 2560x1600, 13.4”, Matte, 3ms, 2022
- Samsung ATNA33AA07-0 : ~$250, 60Hz, AMOLED, 2880×1800, Glossy. (OLED not the best for static content like that displayed while programming)
*Probably will go with this one for the specs. The risk is that the dimensions might be cutting it close for the size of the X200 bezel. I know that tpart made it possible, so I’ll give it a try as well.
Battery
I think this alone will be a pretty big project. Ideally, I want to make a battery pack with it’s own DIY BMS and stuff it in an aftermarket 47++ battery housing. The initial plan is to take some really high quality 18650 cells like the Ampace JP30P1s , and then work my way into being able to design a BMS better than the cheap chinese ones you can buy for a couple bucks. We’ll also need to have a spare retail style battery backup for if you want to travel with the laptop. As y’all may know, lithium-ion batteries can be very dangerous (fires, explosions), so we definitely don’t want to bring an untested, DIY one on an airplane lol. I’m not sure what the backup battery solution is for now, but I guess an external USB-C battery pack could work.
Keyboard
This one also might be tricky - particularly because of the connector that ThinkPad keyboards use. Thankfully, it seems that there have been some smart people  who have attempted to build a controller for it to work with PS/2, so that could give us a nice jumpstart. In terms of connectors, I think we’re going to need an FPC  and maybe a controller with the framework input cover connector. We also need to think about how to get the trackpoint working.
Input / Output (I/O)
I see this section as three parts: one is the mechanical engineering side where we have to design covers for the I/O ports on the laptop, one is the electrical engineering side where we have to design a daughterboard or multiple, and the last is the software engineering side where we potentially have to write device drivers. I’m still split on whether to add a webcam to this laptop…
Resources
- Framework 13 engineering docs: https://github.com/FrameworkComputer/Framework-Laptop-13/tree/main 
- Keyboard work: https://www.zerocat.org/projects/ps2-keyboard/doc/index.html